Shingle sizes matter when you are matching a repair, figuring out how much material a roof needs or comparing products. The catch is that asphalt shingle dimensions are not universal. They vary by type and by manufacturer.
Here is a plain guide to how shingles are sized and measured, and what that means if you are planning asphalt shingle roofing on your home.
Typical 3 Tab Shingle Size
Traditional 3 tab shingles are commonly about 12 inches tall and 36 inches long. The bottom edge is cut into three equal tabs.
Because many older roofs around Pittsburgh still have 3 tab shingles, these sizes come up often when homeowners ask about patching a few missing pieces.
Shingle courses on a finished Malick roof. Each row sits at a set exposure.
Architectural Shingle Sizes
Architectural shingles are usually a little larger than 3 tab shingles and vary more between brands. Each manufacturer lists the exact length, height and exposure on the product data sheet.
That variation is why mixing brands on one roof rarely works. Even when two shingles look close, a small difference in size throws off the rows.
Architectural shingles are larger and thicker than 3 tab shingles.
Key Shingle Terms
These words show up on every shingle package and estimate.
Exposure
The part of each shingle left visible after the next row covers it. It sets the spacing between rows.
Bundle
A wrapped pack of shingles. Most shingle lines take three bundles to cover a square.
Square
The roofing unit of measure: 100 square feet of roof surface.
Nailing line
The marked strip where nails belong. Nailing outside it weakens wind resistance.
Why Exact Dimensions Matter on Install
Each shingle is designed to be installed at a specific exposure and nailed in a specific zone. Following those numbers keeps the rows straight, the sealant strips lined up and the roof covered by the right number of layers.
Getting it wrong can void the manufacturer warranty, which is one reason installation matters as much as the shingle you choose.
Straight, even rows come from following each product's exposure and nailing line.
How Shingle Size Affects Material Orders
Roofers do not order shingles by the piece. They measure the roof in squares, add waste for cuts at valleys, hips and edges, and then order bundles based on the product. Ridge cap and starter strips are ordered separately.
Because shingle sizes vary by product, the bundle count per square can also vary. That is why a roofer measures the roof and picks the shingle line before giving a final material count. A guess based on another brand can leave you short or with extra bundles.
Ridge Cap and Starter Shingles
Not every shingle on a roof is the same size. Starter shingles go along the eaves and rakes before the first row. They are made to seal the edge and give the first course something to bond to, and they are usually narrower than field shingles.
Ridge cap shingles cover the peaks and hips. They are often thicker and pre bent to fit over the ridge, and they come in their own bundles separate from the field shingles.
Using the right starter and ridge pieces from the same manufacturer is part of a complete roof system. It keeps the look consistent and helps the roof meet the manufacturer warranty requirements.
Why Shingle Thickness Matters Too
Dimensions are not only about length and height. Thickness and weight also vary between shingle types. Architectural shingles are laminated from more than one layer, so they are thicker and heavier than 3 tab shingles.
Thicker shingles generally resist wind and wear better and add more texture to the roof. They also take more strength to cut and nail, which affects how a crew works.
If you are replacing a few shingles on an existing roof, matching thickness is just as important as matching length. A thinner shingle next to thicker ones leaves a visible step and may not seal well.
English vs Metric Shingle Sizes
Shingles come in two general size families. The older English size, common on 3 tab roofs, is about 12 inches by 36 inches with an exposure of about 5 inches. Metric sized shingles are larger, roughly 13 1/4 inches by 39 3/8 inches, with an exposure of about 5 5/8 inches.
Most architectural shingles sold today are metric sized, though exact numbers still vary by product. The larger size means fewer shingles per square and fewer rows on the roof, which is one reason bundle counts differ from line to line.
This difference matters on repairs. A metric shingle will not line up with the rows on an older English size roof, so a roofer patching an old 3 tab roof has to find a shingle that matches the original exposure or the patch will throw off every row above it.
The Three Classes of Asphalt Shingles
Manufacturers generally sort asphalt shingles into three classes. Each class has its own sizes, thickness and weight, so knowing the class narrows down what a shingle should measure.
Strip shingles
Single layer shingles such as 3 tab. The thinnest and lightest class, with the most uniform dimensions from brand to brand.
Dimensional shingles
Laminated architectural shingles with two or more layers. Larger and thicker than strip shingles, with sizes that vary by product line.
Designer shingles
Premium laminated shingles styled after slate or wood shake, such as Atlas StormMaster Shake. Often the thickest and heaviest, with their own sizes and installation rules.
How to Measure the Shingles on Your Roof
If you need to know the size of your existing shingles, a spare bundle in the garage or basement is the easiest answer, since the wrapper usually lists the product and its dimensions. Without one, you can measure a shingle at the roof edge with a tape.
Measure the exposure first, which is the visible height of one row from the bottom edge of that row to the bottom edge of the row above. Then measure the length of one shingle from end to end, which is easiest on 3 tab roofs where the joints are clear. On architectural shingles, the joints are harder to find, so a roofer may need to lift a shingle to measure it.
Only measure from a ladder that is secured and on solid ground, and never walk a steep roof to do it. If the roof is high or steep, ask a roofer to take the measurements during an inspection.
Matching Shingles for a Repair
When only a few shingles need replacing, the goal is to match size, profile and color. If the original product is no longer made, a roofer may need to find the closest match, and the patch may show. On an older roof, that is often a sign to start thinking about replacement.
Related reading: shingle pallets and bundles and how many shingles a roofer lays in a day.
Shingle Size FAQs
How many bundles of shingles are in a square?
Most shingle lines take three bundles per square, though some heavier products take more. The package will say.
Are all architectural shingles the same size?
No. Sizes and exposure vary by brand and product line, so always check the manufacturer data.
Can different shingle brands be mixed on one roof?
It is best avoided. Small size differences can throw off rows and affect the warranty.
Why does my roof need extra shingles beyond its area?
Cuts at valleys, hips, edges and around penetrations create waste, so roofers add a waste factor to every order.
Do shingle dimensions affect the warranty?
Indirectly, yes. Manufacturers specify the exposure and nailing pattern for each product, and installing outside those numbers can affect warranty coverage. That is why roofers follow each product data sheet rather than one general rule.
Why do my new shingles look different in size from my old ones?
Your old roof may have English sized shingles while most new architectural shingles are metric sized and laminated. The larger size and different exposure change how the rows look. That is normal on a full replacement, but on a repair it means the replacement shingle has to be matched carefully to the old exposure.
Plan Your Shingle Roof With Malick Brothers
Need a repair matched or a full roof measured? We will measure your roof and recommend the right shingle for it.
Malick Brothers Exteriors is a family owned roofing and exterior contractor at 500 Perry Highway in the North Hills, rated 4.9 on more than 350 Google reviews. Contact us or call (412) 616-0191 to schedule a free inspection and written estimate.