Flat Roof vs Pitched Roof: Pros, Cons and Care on Pittsburgh Buildings

Roofing advice from a family owned Pittsburgh roofing company.

  • Five star Google reviews
  • BBB A+ rated
  • AtlasPro+ Platinum Select
  • PA HIC# PA174918
New siding, soffit, fascia and gutters on a multi unit building in Baden by Malick Brothers Exteriors
November 18, 2026

Pittsburgh has plenty of both. Pitched shingle roofs cover most houses, while flat and low slope roofs top commercial buildings, row houses, porches and additions. Many buildings have one of each.

They work very differently, and they fail in different ways. Knowing how each one behaves helps you plan upkeep and know when to call for commercial roof repair in Pittsburgh.

How Each Roof Handles Water

Pittsburgh commercial building with a pitched shingle roof by Malick Brothers

A pitched roof sheds water fast. Gravity pulls rain and snowmelt down the slope into the gutters, so shingles only need to overlap to stay dry.

A flat roof is never perfectly flat. It has a slight slope toward drains or scuppers, but water moves slowly, so the roof needs a continuous membrane with sealed seams.

A pitched roof on a commercial building sheds water quickly.

Flat Roof Pros and Cons

Flat roofs make good use of space for rooftop units, are easier and safer to walk for inspections and often cost less to build on large buildings.

Their weak points are drainage and seams. Ponding water, clogged drains and failed seams are behind most flat roof leaks.

Flat roofs leave room for equipment and are easy to walk for inspections.

Flat roof on a large building in the Pittsburgh area by Malick Brothers

Pitched Roof Pros and Cons

Pitched roofs drain quickly, handle snow well and give you more material choices, from asphalt shingles to metal and slate. They also add attic space.

They cost more to build on wide buildings and are harder to walk. Most of their problems show up at flashing, valleys and edges.

Side by Side

A quick comparison of the points owners ask about most.

1

Drainage

Pitched roofs shed water quickly. Flat roofs rely on a slight slope and clear drains.

2

Materials

Pitched roofs use shingles, metal or slate. Flat roofs use membranes like EPDM or coatings.

3

Inspections

Flat roofs are easier to walk. Pitched roofs often need a roofer for close checks.

4

Common problems

Flat roofs leak at seams and ponding areas. Pitched roofs leak at flashing and valleys.

Caring for Each Roof Type

Flat roofs need their drains kept clear, especially in fall when leaves pile up. Check for ponding after rain, look at seams and flashing around rooftop units and keep foot traffic to a minimum.

Pitched roofs need clear gutters, a look at the flashing around chimneys and walls and a check for missing or lifted shingles after storms. Both types benefit from a yearly inspection by a roofer who can get close to the details.

Cost Over the Life of the Roof

Upfront cost is only part of the picture. On a large commercial building, a flat roof is usually less expensive to build than a pitched one because it uses less framing and material. On a house, a pitched roof is the norm, and a flat section is usually limited to a porch, addition or garage.

Over time, maintenance shapes the true cost. Flat roofs need regular drain cleaning, seam checks and attention around rooftop equipment. Pitched roofs need gutter cleaning and flashing checks.

Both types last longest when small problems are fixed early. A neglected roof of either type costs more in the end than one that gets a yearly look.

Where Flat and Pitched Roofs Meet

Many buildings have a flat section tied into a pitched roof, such as a porch roof below a second story wall or a low slope addition off the main house. The joint between them is a common leak spot.

Water from the pitched roof runs down onto the flat section, so the flashing at the joint has to carry a lot of water without letting any behind it. Membranes need to turn up the wall and be covered by counter flashing or siding.

When either roof is replaced, the transition should be redone at the same time. Patching new material into old flashing at that joint rarely lasts.

Snow and Freeze Thaw on Each Roof

Pittsburgh winters bring repeated snow, rain and freeze and thaw cycles, and the two roof types handle them differently. A pitched roof lets snow slide and meltwater run off, so most of the stress lands on the eaves, valleys and gutters.

A flat roof holds snow in place until it melts. That adds weight, and the meltwater has to find its way to drains or scuppers that may be partly frozen. Any low spot or clogged drain turns into standing water that refreezes overnight and works at seams and flashing.

Neither roof is wrong for our climate. A flat roof simply needs clear drains, solid seams and a membrane rated for the conditions, such as MuleHide .060 EPDM rubber, while a pitched roof needs a good leak barrier at the eaves and well built valleys.

Usable Space and Energy

A flat roof gives a building space that a pitched roof does not. Rooftop HVAC units sit on it, and on some homes a flat section over a porch or addition is used as a deck. That space comes with a cost in wear, because every visit and every unit adds traffic and penetrations to the membrane.

A pitched roof gives you attic space instead. That space helps buffer the living area from heat and cold, but only when the attic is vented and insulated properly.

For energy, the color and surface of the roof matter on both types. Light colored coatings and membranes reflect more sunlight on flat roofs, which is one reason silicone coatings are popular on commercial buildings. On pitched roofs, ventilation and shingle color play the bigger role.

Which One Should You Choose?

Most owners do not choose from scratch. The building usually decides, and the real question is how to care for what is there or what to use on a new addition. Still, the strengths of each type are clear.

1

Choose a pitched roof if

You want fast drainage, strong snow performance, a traditional look, more material choices and attic space, and the building is a house or small structure.

2

Choose a flat roof if

The building is wide or commercial, you need room for rooftop equipment or a deck, or the design calls for a low profile addition or porch.

What We Install on Flat Roofs

Commercial building with several roof sections in the Pittsburgh area by Malick Brothers

We are MuleHide certified and install MuleHide .060 EPDM rubber, MuleHide 2 ply low slope systems and silicone coatings. On buildings that mix flat and pitched sections, the transition between them needs careful flashing, since that is a common leak spot.

A commercial building with several roof sections that all need to drain cleanly.

Related reading: commercial vs residential roofing and rubber roofing for flat roofs.

Flat vs Pitched Roof FAQs

Do flat roofs leak more than pitched roofs?

Not when they are built and cared for properly, but they are less forgiving of clogged drains and failed seams.

Can a flat roof be converted to a pitched roof?

Sometimes, but it is a structural project. A roofer and often an engineer need to look at the building first.

How often should a flat roof be inspected?

At least once a year and after major storms, with drains cleared each fall.

Are flat roofs harder to insure?

Some insurers ask more questions about flat roofs because of drainage risk. Good records of inspections and repairs help.

What flat roof material lasts longest?

Several systems can last a long time when installed well. EPDM rubber has a long track record on Pittsburgh buildings, and silicone coatings can extend the life of an existing roof in good condition. The right choice depends on the building, the deck and how the roof is used.

Can a flat roof hold the weight of snow?

Flat roofs are designed to carry snow loads set by building codes, so a sound roof handles normal Pittsburgh snowfall. Trouble starts when drains clog and water or ice builds up in low spots, or when the deck is already weak from old leaks. If you see sagging or new ponding after a storm, have the roof checked.

Get Flat or Pitched Roof Help From Malick Brothers

Whether your building has a flat roof, a pitched roof or both, we will inspect it and recommend the right repair.

Malick Brothers Exteriors is a family owned roofing and exterior contractor at 500 Perry Highway in the North Hills, rated 4.9 on more than 350 Google reviews. Contact us or call (412) 616-0191 to schedule a free inspection and written estimate.